III. Profiler (SP) 2.0

SICOM Profiler (SP) is a tool for the application developer that:

• Reloads the profile
• Captures choices and produces a file (the profile) to be read by SDM
• Provides access to configurable attributes of the Display Module

Configuration options — SP will display and capture the following configurable attributes of the Display Module:

1. Main window

1. Initial size/position
2. Title
3. End user can minimize/reposition: Yes/No

2. Working windows

1. SDI vs. MDI
2. If SDI, end user opens file vs. file auto loaded
3. Overview window(s): Yes/No

3. Overview windows

1. Initial size/position
2. End user can hide/show: Yes/No
3. End user can resize/reposition: Yes/No

1. Zooming

1. By rectangle: Yes/No
2. By steps: Yes/No
3. If "by steps" enabled, default step size
4. If "by steps" enabled, end user override of step size: Yes/No

2. Panning

1. By selected point: Yes/No
2. By steps: Yes/No
3. If "by steps" enabled, default step size
4. If "by steps" enabled, end user override of step size: Yes/No
5. By dragging: Yes/No

1. Visibility: by single feature / by layer (a named group of features)
2. Selection

1. By click(s): Yes/No
2. By rectangle: Yes/No

3. Default feature(s)/Layer(s) - Define for:

1. Working windows
2. Overview windows

End user can override default and /or current visibility: Yes/No

4. Layer definition

1. Add features by feature code

Auto construct complement layer: Yes/No

IV. SICOM MasterTailor  (SMT) 2.0 >>>>